Time-dependent i-DFT exchange-correlation potentials with memory: Applications to the out-of-equilibrium Anderson model

We have recently put forward a steady-state density functional theory (i-DFT) to calculate the transport coefficients of quantum junctions. Within i-DFT it is possible to obtain the steady density on and the steady current through an interacting junction using a fictitious noninteracting junction subject to an effective gate and bias potential. In this work we extend i-DFT to the time domain for the single-impurity Anderson model. By a reverse engineering procedure we extract the exchange-correlation (xc) potential and xc bias at temperatures above the Kondo temperature $T_{\rm K}$. The derivation is based on a generalization of a recent paper by Dittmann et al. [arXiv:1706.04547]. Interestingly the time-dependent (TD) i-DFT potentials depend on the system's history only through the first time-derivative of the density. We perform numerical simulations of the early transient current and investigate the role of the history dependence. We also empirically extend the history-dependent TD i-DFT potentials to temperatures below $T_{\rm K}$. For this purpose we use a recently proposed parametrization of the i-DFT potentials which yields highly accurate results in the steady state.Comment: 7 pages, 4 figure

AC transport in Correlated Quantum Dots: From Kondo to Coulomb blockade regime

We explore the finite bias DC differential conductance of a correlated quantum dot under the influence of an AC field, from the low-temperature Kondo to the finite temperature Coulomb blockade regime. Real-time simulations are performed using a time-dependent generalization of the steady-state density functional theory (i-DFT) [Nano Lett. {\bf 15}, 8020 (2015)]. The numerical simplicity of i-DFT allows for unprecedented long time evolutions. Accurate values of average current and density are obtained by integrating over several periods of the AC field. We find that (i) the zero-temperature Kondo plateau is suppressed, (ii) the photon-assisted conductance peaks are shifted due to correlations and (iii) the Coulomb blockade is lifted with a concomitant smoothening of the sharp diamond edges.Comment: 5 pages, 4 figure

Dynamical correction to linear Kohn-Sham conductances from static density functional theory

For molecules weakly coupled to leads the exact linear Kohn-Sham (KS) conductance can be orders of magnitude larger than the true linear conductance due to the lack of dynamical exchange-correlation (xc) corrections. In this work we show how to incorporate dynamical effects in KS transport calculations. The only quantity needed is the static xc potential in the molecular junction. Our scheme provides a comprehensive description of Coulomb blockade without breaking the spin symmetry. This is explicitly demonstrated in single-wall nanotubes where the corrected conductance is in good agreement with experimental data whereas the KS conductance fails dramatically.Comment: 5 pages (4 figures) + 3 pages (2 figures) Supplemental Materia

Transport through correlated systems with density functional theory

We present recent advances in Density Functional Theory (DFT) for applications to the field of quantum transport, with particular emphasis on transport through strongly correlated systems. We review the foundations of the popular Landauer-B\"uttiker(LB)+DFT approach. This formalism, when using approximations to the exchange-correlation (xc) potential with steps at integer occupation, correctly captures the Kondo plateau in the zero bias conductance at zero temperature but completely fails to capture the transition to the Coulomb blockade (CB) regime as temperature increases. To overcome the limitations of LB+DFT the quantum transport problem is treated from a time-dependent (TD) perspective using TDDFT, an exact framework to deal with nonequilibrium situations. The steady-state limit of TDDFT shows that in addition to an xc potential in the junction, there also exists an xc correction to the applied bias. Open shell molecules in the CB regime provide the most striking examples of the importance of the xc bias correction. Using the Anderson model as guidance we estimate these corrections in the limit of zero bias. For the general case we put forward a steady-state DFT which is based on the one-to-one correspondence between the pair of basic variables steady density on and steady current across the junction and the pair local potential on and bias across the junction. Like TDDFT, this framework also leads to both an xc potential in the junction and an xc correction to the bias. Unlike in TDDFT, these potentials are independent of history. We highlight the universal features of both xc potential and xc bias corrections for junctions in the CB regime and provide an accurate parametrization for the Anderson model at arbitrary temperatures and interaction strengths thus providing a unified DFT description for both Kondo and CB regimes and the transition between them.Comment: 29 pages, 22 Figure

Interpretation of STS-3/plasma diagnostics package results in terms of large space structure plasma interactions

The Plasma Diagnostics Package, which was flown aboard STS-3 recorded various chemical releases from the Orbiter. Changes in the plasma environment were observed to occur during Flash Evaporator System (FES) releases, water dumps and maneuvering thruster operations. During flash evaporator operations, broadband Orbiter-generated electro-static noise is enhanced and plasma density irregularity (delta n/N) is observed to increase by as much as 4 times and is strongly peaked below 6 Hz. In the case of water dumps, background electrostatic noise is enhanced or suppressed depending on frequency and Delta N/N is also seen to increase by as much as 4 times. Various changes in the plasma environment are effected by primary and vernier thruster operations. In addition, thruster activity stimulates electrostatic noise with a spectrum which is most intense at frequencies below 10 kHz

Continuum radiation in planetary magnetospheres

With the completion of the Voyager tour of the outer planets, radio and plasma wave instruments have executed the first survey of the wave spectra of Earth, Jupiter, Saturn, Uranus, and Neptune. One of the most notable conclusions of this survey is that there is a great deal of qualitative similarity in both the plasma wave and radio wave spectra from one magnetosphere to the next. In particular, in spite of detailed differences, most of the radio emissions at each of the planets have been tentatively classified into two primary categories. First, the most intense emissions are generally associated with the cyclotron maser instability. Second, a class of weaker emissions can be found at each of the magnetospheres which appears to be the result of conversion from intense electrostatic emissions at the upper hybrid resonance frequency into (primarily) ordinary mode radio emission. It is this second category, often referred to as nonthermal continuum radiation, which we will discuss in this review. We review the characteristics of the continuum spectrum at each of the planets, discuss the source region and direct observations of the generation of the emissions where available, and briefly describe the theories for the generation of the emissions. Over the past few years evidence has increased that the linear mode conversion of electrostatic waves into the ordinary mode can account for at least some of the continuum radiation observed. There is no definitive evidence which precludes the possibility that a nonlinear mechanism may also be important

Jupiter Data Analysis Program: Analysis of Voyager wideband plasma wave observations

Voyager plasma wave wideband frames from the Jovian encounters are analyzed. The 511 frames which were analyzed were chosen on the basis of low-rate spectrum analyzer data from the plasma wave receiver. These frames were obtained in regions and during times of various types of plasma or radio wave activity as determined by the low-rate, low-resolution data and were processed in order to provide high resolution measurements of the plasma wave spectrum for use in the study of a number of outstanding problems. Chorus emissions at Jupiter were analyzed. The detailed temporal and spectral form of the very complex chorus emissions near L = 8 on the Voyager 1 inbound passage was compared to both terrestrial chorus emissions as well as to the theory which was developed to explain the terrestrial waves

Orbital Dependent Exchange-Only Methods for Periodic Systems

Various orbital-dependent exchange-only potentials are studied which exhibit correct long-range asymptotic behaviour. We present the first application of these potentials for polymers and by one of these potentials for molecules. Kohn-Sham type calculations have been carried out for polyethylene in order to make valuable comparison of these potentials with each other as well as with Hartree-Fock and exchange-only LDA methods. The Kohn-Sham band gap obtained with the optimized effective potetial method is corrected with the exchange contribution to the derivative discontinuity of the exchange-correlation potential. The corrected band gap obtained with the Slater's exchange potential is 9.7 eV close to the experiment.Comment: 11 pages, 2 figures. Phys. Rev. B60, 1999, in pres

Parameter Identification of Pressure Sensors by Static and Dynamic Measurements

Fast identification methods of pressure sensors are investigated. With regard to a complete accurate sensor parameter identification two different measurement methods are combined. The approach consists on one hand in performing static measurements - an applied pressure results in a membrane deformation measured interferometrically and the corresponding output voltage. On the other hand optical measurements of the modal responses of the sensor membranes are performed. This information is used in an inverse identification algorithm to identify geometrical and material parameters based on a FE model. The number of parameters to be identified is thereby generally limited only by the number of measurable modal frequencies. A quantitative evaluation of the identification results permits furthermore the classification of processing errors like etching errors. Algorithms and identification results for membrane thickness, intrinsic stress and output voltage will be discussed in this contribution on the basis of the parameter identification of relative pressure sensors.Comment: Submitted on behalf of EDA Publishing Association (http://irevues.inist.fr/EDA-Publishing